Hydrochloric acid storage tank design specifications after installation to carry out secondary grouting maintenance requirements, the actual situation of the root site and the height of FRP storage tank, respectively, in the glass fiber reinforced plastic storage tank lapping a set of mobile scaffol...
1. Raw and auxiliary materials of FRP mixing tank: Glass fiber winding yarn, resin, fiber felt, etc.2. FRP mixing tank manufacturing process: by computer control on the mandrel according to the requirements of the production of lining layer (such as anti-corrosion lining layer) gel in accordance wit...
In the outage process, FRP tanks can not be arbitrarily installed.No negative pressure operation is allowed in atmospheric tanks.FRP tanks cannot withstand loads during application.When receiving an active vibration source, effective measures should be taken to avoid vibration.Keep away from fire an...
玻璃钢储罐维修的注意事项有哪些?下面小编就给大家介绍一下。1、室外应用玻璃钢储罐应用积年之后因表层脆化，造一天到晚然树脂层脱落或化学纤维露出。建议每二、三年应在罐外表面刷涂漆料或达玛树脂，防止脆化，增加应用存活的期限。2、进到了玻璃钢储罐内检修，先要关掉所有入料闸阀，放空自己并清理储罐，经检...
The corrosiveness of hydrochloric acid is very large and increases with the increase of concentration temperature.Therefore, it is important to choose a good material for hydrochloric acid storage tank.Generally, non-metals have good corrosion resistance to them, and plastic is ideal when the use te...
The production requirements for FRP tanks are as follows: FRP tanks are one of the FRP products, mainly made of a new type of composite material using fiberglass as the reinforcing agent and resin as the adhesive, and controlled by a microcomputer for winding1. Manufacturing processUnder the control...
FRP tanks are divided into vertical storage tanks, horizontal FRP tanks, transportation tanks, reaction tanks, and various chemical equipment. FRP horizontal storage tanks, vertical storage tanks, transportation tanks, containers, and large series of containers are selected according to the medium u...
1. Fencing protectionGenerally speaking, the work of anti-corrosion storage tanks is mostly carried out outdoors, so wind and sand can be relatively large. Therefore, fences should be set up around them, and the coating operation should be located at the upper air outlet and sandblasting operation s...
We should pay attention to some issues when using FRP tanks, and avoid the following explanations when using them.Description: FRP tanks are lightweight, high-strength, and corrosion-resistant non-metallic tanks. It is a glass fiber with resin based weight that is wound layer by layer on a rotating...
Good corrosion resistance, FRP is a good corrosion resistant material that has strong resistance to atmospheric, water, general concentrations of acids, alkalis, salts, as well as various oils and solvents. It has been applied to various aspects of chemical anti-corrosion and is replacing carbon ste...
